AIM 7.62x39 Top Rail Weaver Mount For Scopes and Accessories

AIM 7.62x39 Top Rail Weaver Mount For Scopes and Accessories Review

AIM Sports brings you the perfect solution for your Kalashnikov rifle. This Tri-rail will mount directly to the back of your 7.62x39 Variant. This is a must have for any serious Kalashnikov sporter. Works great on Saigas too

Marlin Lever Action Weaver Scope Mount

Marlin Lever Action Weaver Scope Mount Review

Marlin Lever Action Weaver Scope Mount Feature

• NcStar Weaver Type Scope Mount Rail For Marlin 992M 989 .22 9mm .45 375 1993 1894 1895 Cowboy Rifles

One-piece top mount base for flat top Marlin receivers. Comes complete with allen wrench and mounting screws.

AR-PEPR QD Scope Mount

AR-PEPR QD Scope Mount Review

AR-PEPR QD Scope Mount Feature

• Please note: This supplier will be closed on 11/24, 11/25, 12/26 for the holidays. The shipping cut off is UPS's cut off of 12/15 to try and have the products delivered by Christmas. Note: Please check your state regulations, hunting regulations, etc before placing an order with this supplier. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.

Burris AR Tactical Proper Eye Position Ready Mount 1 Matte w/Picatinny Tops Aluminum 410343 Please note: This supplier will be closed on 11/24, 11/25, 12/26 for the holidays. The shipping cut off is UPS's cut off of 12/15 to try and have the products delivered by Christmas. Note: Please check your state regulations, hunting regulations, etc before placing an order with this supplier. Your order may be canceled if the item is not able to be shipped to your state due to their regulations.

Wideview See Thru Scope - Side Mount for the Winchester 94 and 96 firearms

Wideview See Thru Scope - Side Mount for the Winchester 94 and 96 firearms Review

Wideview See Thru Scope - Side Mount for the Winchester 94 and 96 firearms Feature

• Fits the Winchester 94 and 96 firearms
• This scope mount is made of aluminum extrusion anodized bright for lifetime use
• The screws are heat treated socket cap screws and they have a special oversize head for more holding power in the aluminum
• These see-thru mounts allow you to use the iron sights as well as the scope so you won't miss that close running shot
• 100 percent Manufactured in the USA

THE WIDEVIEW SEE THRU SCOPE MOUNT IS MANUFACTURED IN THE USA SINCE 1970. THIS PRODUCT IS MADE OF ALUMINUM EXTRUSION ANODIZED BRIGHT FOR LIFETIME USE. THE SCREWS ARE HEAT TREATED SOCKET CAP SCREWS. THEY HAVE AN SPECIAL OVERSIZE HEAD FOR MORE HOLDING POWER IN THE ALUMINUM . THE THREADED HOLES ARE ROLLED RATHER THAN CUT FOR 60% MORE STRENGTH. THESE MOUNTS SCREW DIRECTLY TO THE RECEIVER. THESE SEE-THRU MOUNTS ALLOW YOU TO USE THE IRON SIGHTS AS WELL AS THE SCOPE SO YOU WON'T MISS THAT CLOSE RUNNING SHOT. ALSO GREAT IN WINTER WHEN THE ONLY THING YOU SEE IN YOUR SCOPE IS SNOW FLAKES.

UTG New Gen. 4-Point Locking Deluxe M14/M1A Scope Mount

UTG New Gen. 4-Point Locking Deluxe M14/M1A Scope Mount Review

UTG New Gen. 4-Point Locking Deluxe M14/M1A Scope Mount Feature

• New Gen mil-spec quality deluxe sniper mount for M14/M1A rifles
• Over 6-inch fully Picatinny-compatible top rail with 15 slots; accepts Weaver-style rings and allows use of iron sights
• 1-piece machined from aircraft-grade aluminum alloy with black matte finish
• Side plate features locking point, horizontal bottom guide and adjustable side screw to provide a rock solid foundation
• Installs easily, no gunsmithing required; measures 6.1 by 1.6 by 1.8 inches (L x W x H)

This New Gen Deluxe Scope Mount is made for M14/M1A rifles and features a one-piece design machined from aircraft-grade aluminum alloy with a black matte finish. It features a 6-inch fully Picatinny-compatible top rail with 15 slots, a lockable rear end with charger guide dovetail, side plate with locking point, horizontal bottom guide, and adjustable side screw to provide a rock solid foundation. Its accepts Weaver style rings and is see-through to allow for the use of iron sights for aiming when installed. Plus, it installs easily with no gunsmith required and comes with black rubber rail guards.

Features:

• New Gen mil-spec quality deluxe sniper mount for M14/M1A rifles
• See-through design for use with original sights; may be low profile with special cutting, high profile with tunnel, or clearance so as not to block the user's vision from the rear aperture to front post
• Over 6-inch fully Picatinny-compatible top rail with 15 slots
• Rear end locks into the charger guide dovetail
• 1-piece machined from aircraft-grade aluminum alloy with black matte finish
• Side plate features locking point, horizontal bottom guide and adjustable side screw to provide a rock solid foundation
• Accepts Weaver-style rings and allows use of iron sight
• Installs easily, no gunsmithing required
• Black rubber rail guards included

Specifications:

• Material: Aluminum
• Weight: 5.7 ounces
• Pieces: 1
• Rail Type: Picatinny/Weaver
• Rails: 1
• Dimensions: 6.1 by 1.6 by 1.8 inches (L x W x H)

About UTG and Leapers, Inc.
Leapers, Inc., headquartered in Michigan, has been in the business of supplying shooting, hunting, and outdoor gear since 1991. By setting un-compromised high standards for all of their business operations, Leapers' goal is to provide total solutions by paying close attention to industry trends and customer feedback, with a focus on making the best-in-class niche products available for hunting, shooting, and outdoor enthusiasts.

In 2009, Leapers made an important decision to start our Made-In-the-USA Manufacturing Operation. With a full commitment to serving more customers in the market with 922R compliant products, Leapers has begun making unique mounting systems under the UTG PRO brand in Michigan and will continue to be innovators in the hunting, shooting, and outdoor industries.

Gen. 2 Deluxe M-14/M1A Level III Tactical Scope Mount

Mauser K98 Mil. - spec Rifle Scope Mount

Mauser K98 Mil. - spec Rifle Scope Mount Review

Mauser K98 Mil. - spec Rifle Scope Mount. No - tap, no - drill easy install! Fits your mil.-spec Mauser K98, providing a Weaver base for attaching scopes, sights, rings, lasers and lights... 13 separate slots in all! Tough aircraft-grade aluminum. Easy install... simply replace the rear sight. Includes Allen keys, mounting screws and roll pin. Limited lifetime warranty. Act now! Place your order! WARNING: This item cannot be shipped to Canada. Please check your State, County and City laws for restrictions before ordering this product. Mauser K98 Mil.-spec Rifle Scope Mount

Leapers Accushot 1-Pc Mount w/1 Rings, High, 11mm Dovetail

Leapers Accushot 1-Pc Mount w/1 Rings, High, 11mm Dovetail Review

Leapers Accushot 1-Pc Mount w/1 Rings, High, 11mm Dovetail Feature

• SCOPE MOUNTS

1 rings• High profile• Fits 11mm dovetail• 4 hex screws/ring secure the scope• 100mm base length• 80mm between rings• Vertical stop pin •Special tape inside the rings keeps your scope tight without excessive clamp pressure!

BSA Tactical Weapon 4 x 30mm Rifle Scope with Mil-Dot Reticle, Rings and AR/SKS Mount

BSA Tactical Weapon 4 x 30mm Rifle Scope with Mil-Dot Reticle, Rings and AR/SKS Mount Review

BSA Tactical Weapon 4 x 30mm Rifle Scope with Mil-Dot Reticle, Rings and AR/SKS Mount Feature

• 4 Power
• Fully Multi-Coated optics
• Precision windage and elevation adjustments
• Waterproof, fogproof and shockproof
• Includes AR and SKS mounts

The Tactical Weapon Series scopes are engineered specifically for use with tactical style firearms. These scopes are built tough to handle the most demanding tasks that one faces in tactical situations

AR15 Carry Handle 30mm Scope Mount with 1" Inserts/Compact 2½"

AR15 Carry Handle 30mm Scope Mount with 1" Inserts/Compact 2½" Review

AR15 Carry Handle 30mm Scope Mount with 1" Inserts/Compact 2½" Feature

• Black

AR15 CARRY HANDLE 30MM SCOPE MOUNT WITH 1" INSERTS/COMPACT 21/2"

UTG MNT973 AK47 Side Mount with Double Rails

UTG MNT973 AK47 Side Mount with Double Rails Review

UTG MNT973 AK47 Side Mount with Double Rails Feature

• AIRSOFT ACCESSORIES

3rd Gen AK Side Mount with Double Rails for Scope and Accessory Applications

New Century Nc Star-Ruger Mini 14-Mini 30 Ranch Rifle Weaver Scope Mount

New Century Nc Star-Ruger Mini 14-Mini 30 Ranch Rifle Weaver Scope Mount Review

Low Profile Weaver Rail Scope Mount For Ruger Mini 14 And 30

SKS Gas Tube Weaver Scope Mount

SKS Gas Tube Weaver Scope Mount Review

SKS Gas Tube Weaver Scope Mount Feature

• Made by NcStar
• See Description

SKS Gas Tube With Weaver Picatinny Rail

Leapers Accushot 1-Pc Offset Mount w/1 Rings, Weaver/Picatinny Mount

Leapers Accushot 1-Pc Offset Mount w/1 Rings, Weaver/Picatinny Mount Review

Leapers Accushot 1-Pc Offset Mount w/1 Rings, Weaver/Picatinny Mount Feature

• SCOPE MOUNTS

OFFSET RING MOUNTS, AccuShot Picatinny/Weaver Style 1" Bi-direction Integral Offset Mount - 62mm Base Length, 38mm Bi-Directional Eye Relief Offset Adjustment

Weaver Base Top Mount - 92A

Weaver Base Top Mount - 92A Review

Weaver Base Top Mount - 92A Feature

• Top mount aluminum base
• Machined to tight tolerances for a custom fit
• For detachable and adjustable rings
• Aluminum bases offer maximum strength for rings to hold tight

Each Weaver base is machined to tight tolerances for a custom fit. These Aluminum bases offer maximum strength for rings to hold tight. Our extensive line of bases provides a precision fit to custom match your Weaver rings of choice. Whether you need a base to accommodate your modern sporting rifle, a competition pistol, inline muzzleloader or your favorite bolt-action hunting rifle; every one of our mounts delivers a solid start.

UTG 5th Gen Quick Detachable Double Rail AK Side Mount

UTG 5th Gen Quick Detachable Double Rail AK Side Mount Review

UTG 5th Gen Quick Detachable Double Rail AK Side Mount Feature

• New Gen. AK Double Rail Side Mount Designed with Quick Detachable/Lock Lever
• Fully Adjustable for Most Side Rail Variants. Precision Machined to Fit Most AKs and AK Variants
• Machined from Aircraft Grade Aluminum for Extreme Strength
• Double Picatinny Rails for Scope & Versatile Accessory Applications
• STANAG Dimension and 12 Slots on Top Rail, 8 Slots on Side Rail. Optimal Clearance to Fit All Tactical Scopes Right on Top of Bore Centerline

Made by Leapers, this double-rail AK side mount sports a lever that enables you to quickly attach or detach it to or from your gun. The mount is fully adjustable for most side rail variants and is precision-machined to fit most AKs and AK variants. It features double Picatinny rails for the scope and offers optimal clearance to fit all tactical scopes right on top of the bore centerline. The mount is also designed to accommodate STANAG-style scopes.

The mount is made of aircraft-grade aluminum for extreme strength. It measures 5.5 inches long by 3.3 inches high by 1.7 inches wide and weighs 7.3 ounces.

Manufacturer's Warranty
This product is covered by a limited lifetime warranty.

About Leapers
Leapers Inc., headquartered in Michigan, has been in the business of supplying shooting, hunting, and outdoor gear since 1991. The company sets uncompromised, high standards for all of its business operations. Its goal is to provide a total solution for any lines of products it offers. Leapers pays close attention to industry trends and customer feedback, with a focus on making best-in-class niche products available for hunting, shooting, and outdoor enthusiasts.

AK Double Picatinny Rail Side Mount With Quick Detachable/Lock Lever. Fully Adjustable For Most Side Rail Variants. STANG Dimension w/12 Slots On Top Rail and 8 Slots On Side Rail

ATI Mosin Nagant Scope Mount with Bolt Handle

ATI Mosin Nagant Scope Mount with Bolt Handle Review

ATI Mosin Nagant Scope Mount with Bolt Handle Feature

• Unique scope mount made of hard coat anodized T6 aluminum
• Allows scope to be mounted over the receiver
• Bolt handle is polished stainless steel
• Assembly hardware and detailed instructions included

Mosin Nagant Scope Mount with Bolt Handle is a unique scope mount made of Hard Coat Anodized T6 Aluminum. Allows scope to be mounted over the receiver. The bolt handle is polished stainless steel. Assembly hardware and detailed instructions are included.

Warne Scope Matte Ramp Mount (30mm )

Warne Scope Matte Ramp Mount (30mm ) Review

Warne Scope Matte Ramp Mount (30mm ) Feature

• Finish: Matte
• Flat Top: 30mm
• Cantilever design for proper optics mounting
• Up to 2 integrated mounting rails

The all new Warne Rapid Acquisition Multi-Sight Platform, or RAMP, is a cantilever style scope mounting platform that allows proper scope installation on the popular AR-15 rifle. This new mounting system positions the front ring forward of the upper receiver by 1 ¾ inches, enabling the shooter to have proper head orientation whether upright or prone without sacrificing or compromising due to improper positioning. The RAMP also offers a unique 45 degree mounting rail on both sides of the optic. It conveniently has both Variable optics and CQB sights for long and short distance scenarios.