Scope Rail Mount for MP5 MK5 M5 style guns NCStar

Scope Rail Mount for MP5 MK5 M5 style guns NCStar Review

Scope Rail Mount for MP5 MK5 M5 style guns NCStar Feature

• Metal Construction
• Matte Black
• Fits Real Steel & Airsoft Guns
• Adds an upper rail to any M5, MK5, & MP5 style gun
• Lifetime NCStar Warranty!!

Scope Rail Mount for MP5 MK5 M5 style guns NCStar

Fits most MP5, MK5, and M5 Real Steel and Airsoft Guns. Instantly add a top rail mount to your close quarters weapon. No drilling required. (Gun and Scope not included).

Mil Spec:

Metal Construction
Matte Black
Weaver style rail clamps directly to top of receiver
Weight: 2.53 oz
Length: 4.96"
NCSTAR LIFETIME WARRANTY!

Remington Model 700 Rifle Integral Scope Mounts - Black

Remington Model 700 Rifle Integral Scope Mounts - Black Review

Will fit most model 700 Remington rifles. 2 piece set with base and lower ring. Medium rise mount. Constructed of Z-2 alloy (50% stronger than aluminum). Torx grade 8 tactical screws included.

Horton Crossbow Scope Mount Kit

Horton Crossbow Scope Mount Kit Review

Horton Crossbow Scope Mount Kit Feature

• Item Includes: Weaver style scope base
• two 1" aluminum rings.
• Fits all Horton crossbows and scopes with 1" tubes.
• Precision machined
• Legendary Horton quality

Mult-A-range scope mount kit has a weaver style base and 2 aluminum 1" rings and 7/8" dovetail bracket. Perfect for monting any 1" scope on your Horton crossbow.

TMS AR15 Flat Top One Piece Ring Mount Picatinny

TMS AR15 Flat Top One Piece Ring Mount Picatinny Review

TMS AR15 Flat Top One Piece Ring Mount Picatinny Feature

• One piece body design for better scope alignment
• Offset design for easy scope position
• Made of aircraft grade aluminum alloy
• 1.58" (40mm) optimal center height for flat top AR15
• Good for use with both 30mm and 1inch scopes

One piece body Design for better scope alignment
Two integral 30mm rings with 1" size inserts(installed as shown in picture) Offset design to better work with scope eye relief
Center height: 1.58" (40mm). Perfect for flat top AR15
Good for Magnified optics scopes with objective lens size up to 60mm
Ring width: 0.62"
Openning between rings: 2.16"
Attaches to flat top Picatinny rails
Locks firmly in place with 1/2" hex screws
Kit includes an extra ring top with accessory rail for use with accessories such as laser sight
Made of heavy duty quality aluminum alloy
Anodized black matte finish
Overall length: 3.43"
Weight: 4.6OZ
Base rail length: 2"
Recoil lug: cross-slot steel bolt shaft

UTG Medium Profile Riser Mount with 13 slots

UTG Medium Profile Riser Mount with 13 slots Review

UTG Medium Profile Riser Mount with 13 slots Feature

• New Gen. riser mount for rifles with Picatinny/Weaver rail
• 1 Picatinny rail with 13 slots
• Side plate with spring tension for quick and easy installation
• Precision machined from aircraft aluminum with matte black anodizing
• Dimensions: 5.7 by 1.75 inches (L x W)

This UTG New Gen, riser mount has a 5.7-inchPicatinny rail with 13 slots, a medium profile, and is see-through to allow for use with the original iron sights. It features a .83 of an inch saddle height, a side plat with spring tension for quick and easy installation, and is precision machined from aircraft-grade aluminum with matte black anodizing. Includes a mounting base, two through holes, and proper clearance below the base for installing the classic STANAG-styled scopes.

Features:

• New Gen. riser mount for rifles with Picatinny/Weaver rail
• 1 Picatinny rail with 13 slots
• Medium profile
• Side plate with spring tension for quick and easy installation
• Precision machined from aircraft aluminum with matte black anodizing
• 0.83-inch saddle height with see-through design
• See-through design allows for the use of the original iron sights

Specifications:

• Material: Aluminum
• Weight: 6.1 ounces
• Pieces: 1
• Rail Type: Picatinny/Weaver
• No. of Rails: 1
• Dimensions: 5.7 by 1.75 inches (L x W)

About UTG and Leapers, Inc.
Leapers, Inc., headquartered in Michigan, has been in the business of supplying shooting, hunting, and outdoor gear since 1991. By setting un-compromised high standards for all of their business operations, Leapers' goal is to provide total solutions by paying close attention to industry trends and customer feedback, with a focus on making the best-in-class niche products available for hunting, shooting, and outdoor enthusiasts.

In 2009, Leapers made an important decision to start our Made-In-the-USA Manufacturing Operation. With a full commitment to serving more customers in the market with 922R compliant products, Leapers has begun making unique mounting systems under the UTG PRO brand in Michigan and will continue to be innovators in the hunting, shooting, and outdoor industries.

Medium Profile Riser Mount, 0.8” Saddle Height with See-through Design, 5.7” Long Picatinny Rail with STANAG Feature, Total 13 Slots, Made from Aircraft Aluminum with Matte Anodizing

Millett Aluminum 1-Inch See Thru Scope Mount for Marlin 336, 30As Series (Matte)

Millett Aluminum 1-Inch See Thru Scope Mount for Marlin 336, 30As Series (Matte) Review

Millett Aluminum 1-Inch See Thru Scope Mount for Marlin 336, 30As Series (Matte) Feature

• Riflescope Accessory

Millett 1in Matte Marlin 336 30AS Aluminum See Thru Scope Mount - Millett SE00706.

Weaver Grand Slam Steel 1-Inch Medium Top Mount Rings

Weaver Grand Slam Steel 1-Inch Medium Top Mount Rings Review

Weaver Grand Slam Steel 1-Inch Medium Top Mount Rings Feature

• Solid steel construction
• The time tested Weaver cross lock design means a tight, secure fit on your favorite rifle
• Rings perform when the pressure is on

The proven strength of Grand Slam features steel construction for the ultimate hold. Solid steel construction means that Weaver Grand Slam™ Rings perform time after time when the pressure is on. The time tested Weaver cross lock design means a tight, secure fit on your favorite rifle. Also available in silver, there is a Grand Slam ring designed to fit all of your shooting needs. Weaver rings can handle any scope-mounting need. Whether you're looking for our classic Weaver's original cross-lock Top Mount, windage adjustable or dovetail extension rings; we have many great options. These rings are available in a variety of choices including aircraft-grade aluminum options or Grand Slam steel, and many more.

High Profile Scope Rings Weaver Rail Mounts QD See-Thru

High Profile Scope Rings Weaver Rail Mounts QD See-Thru Review

High Profile Scope Rings Weaver Rail Mounts QD See-Thru Feature

• O: 2 .20"
• D: 1"
• H: 1.25"
• BASE: 5 /8"
• MATERIAL: Aluminum

30mm weaver ring with 1in. inserts 30mm weaver ring 1in. inserts in Scope rings Made with extremely high quality mater

Cantilever 1" Scope Ring Front and Rear Mount

Cantilever 1" Scope Ring Front and Rear Mount Review

Cantilever 1" Scope Ring Front and Rear Mount Feature

• All heat treated steel and aluminum construction
• Precise machining
• Mil Spec 1913 Picatinny Quad Rail
• Easy installation with minimal effort over the Barrel and the cleaning rod
• No Modification needed

Quad rail barrel mount is designed to go over the barrel and the cleaning rod of your AK 47 without any modification. No modification to the original AK needed.

NIKON M-223 743 AR Mount (Black)

NIKON M-223 743 AR Mount (Black) Review

NIKON M-223 743 AR Mount (Black) Feature

• Built-in 20-degree minute of angle (MOA) incline
• Maximizes elevation for extreme long range shooting
• Lightweight alloy construction
• Fits flattop Picatinny rails and Weaver-style bases

The M-223 AR Mount was developed for use with Nikon's M-223 series of riflescopes. Featuring lightweight yet sturdy alloy construction, this mount fits Picatinny rails found on most flattop ARs, as well as Weaver-style bases. The mount offers a built-in 20-degree minute of angle (MOA) incline to maximize elevation for extreme long range shooting.

The M-223 features lightweight and sturdy alloy construction.

Recognizing the popularity of AR rifles, Nikon has developed a new line of riflescopes built to deliver extreme speed, accuracy and shooting confidence. The M-223 line offers five new riflescopes, all engineered for the 223 Rem./5.56mm NATO round with 55-grain polymer tipped bullet with a muzzle velocity of 3240fps. With Nikon's latest reticle and adjustment technologies, the M-223 integrates the same level of quality as the flagship Monarch riflescopes. "The recent surge in AR-type rifle purchases means there is a new group of customers out there learning just how much fun owning an AR is," said Jon LaCorte, senior product marketing manager Nikon Sport Optics. "We've built the M-223 family to help them enjoy and use their rifles no matter if it's for competition, varmint or predator hunting or just plinking fun." All of the new M-223 riflescopes feature Nikon's famous fully multicoated optics, up to 95% light transmission, waterproof/fogproof/shockproof performance and lifetime warranty. Designed for AR carbines and popular 3 gun competitions, the 1-4x20 with Point Blank reticle features an extremely large exit pupil for low light performance and a super wide field of view. The all-new Point Blank reticle technology means incredibly accurate and fast shooting from zero to 200 yards thanks to thick reticle posts and purpose-designed 3-MOA center dot for instant targeting on paper or steel plates. The 2-8x32 is available with Nikon's all new BDC 600 reticle or the Nikoplex reticle with Nikon's new Rapid Action Turret system; both are ballistically matched to the 223 Rem. round and offer unprecedented speed in dialing in your shots for virtually any known distance-from 0 to 600 yards.

UTG New Gen SKS Picatinny Tri-Rail Mount

UTG New Gen SKS Picatinny Tri-Rail Mount Review

UTG New Gen SKS Picatinny Tri-Rail Mount Feature

• Innovative Upper Cover Precision Machined from Aircraft Grade Aluminum for Extreme Strength
• Light Weight with Optimal Width and Height
• 9 Slots on Top Rail to Fit Tactical Scope Right on Top of Bore Centerline
• 2 Side Rails with 6 and 9 slots Respectively for Flashlight, Laser and Other Accessories
• Allow Installation of Shell Deflector

New Gen SKS Picatinny Tri-Rail Mounting System, 9 Slots on Top and One Side Rai, 6 Slots on 2nd Side Rail

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit Review

UAG Mosin Nagant 2-7x32 Long Eye Relief Scope + New Generation Weaver Rail Mount + Scope Rings+ Lens Covers+Lens Cleaning Kit Feature

• MAGNIFICATION-2x-7x ADJUSTABLE
• OBJECTIVE DIAMETER- 32mm, TUBE DIAMETER. : 1"
• FIELD OF VIEW @ 100 YRS ( FEET ) : 14-4.5 /// CLICK VALUE@100 YARDS-1/4"
• EYE RELIEF ( INCH ) : 8.7-10.65
• EXIT PUPIL ( MM ) : 16-4.6

Official UAG Mosin Nagant 2-7x32 Long Eye relief scope and mount package. Includes the 2-7x32 Duplex Reticle Long Eye Relief scope, Mosin Nagant Weaver Mount, mounting hardware, rings, lens cleaning kit, and lens covers. The scope is Nitrogen filled, fogproof, shock proof to withstand and perfrom under the highest recoil, and water resistant. Features a duplex reticle for sharper aiming points and a clear and bright field of view. Lenses are multi coated blue for lowlight conditions and is fully adjustable for windage and elevation click adjustments. Includes see through lens covers, deluxe cleaning kit, as well as Premium "QD" 7/8 weaver scope rings. The included Mosin Nagant mount fits most Mosin Nagant rifles including most Russian-Polish-Chinese-Hungarian models M44, 91-30, M91-30 as well as various 30's- 7.62x54R Carbines. Approximately 6.61" long, this mount is made from high grade aircraft aluminum with a black anodized finish and will give you a WEAVER/ PICATINNY 7/8" rail mounting platform for your included UAG MOSIN NAGANT SCOPE or other weaver based scopes-sights-lasers-lights. Easy Installation

Mark III Tactical Scope Adapter/Weaver Base/34mm

Mark III Tactical Scope Adapter/Weaver Base/34mm Review

Mark III Tactical Scope Adapter/Weaver Base/34mm Feature

• Single Weaver-style 34mm scope adapter for Mark III tactical scope
• Lets you mount such accessories as red dot sight, laser, or flashlight
• High-quality anodized-aluminum construction
• Measures 1.8 inches long; weighs 0.7 ounces

This single Weaver-style scope adapter allows you to mount single accessories, such as a red dot sight, laser, or flashlight, to your Mark III tactical scope. Made of high-quality anodized aluminum, the 34mm adapter measures 1.8 inches long and weighs 0.7 ounces. Description NcSTAR introduces the Ultimate Sighting System (USS). With the Ultimate Sighting System you get all the Benefits of a Mark III Tactical Scope with the Advantage of a Back-up Red Dot Sight. This System is comprised of a Mark III Tactical Scope with a Specially Designed Ring that mounts directly to the Ocular Lens Housing with a Built-in Weaver Style Platform. This is the prefect platform for the DDAB Red Dot Sight (also included in the USS). This System is perfect for both Close Quarter Battle and Long Range Shooting. The Specially Designed Mount you can be rotated left or right for those who prefer Offset Functionality. The Mount will also be offered individually so you can add it to your other Mark III Tactical Rifle Scopes! Scope not included